Bosch 210lb EV6/14 Injector set for 8-Cyl application(Discontinued)

Bosch 210lb EV6 Injector set for 8Cyl application

Be Prepared in the future as this model is facing a possible Discontinuation from BOSCH (8-19-2026)

210lbs or 2200cc at 43.5 psi

• New genuine Bosch 210lb/2200cc fuel injector 0280158843 EV14 plug end
• Injector specs:
• Hi-Resistance: 9.1 Ohms / Hi-Impedance
• Dead Time: 0.45ms at 14 volts
• Static Flow Rate @ 43.5 PSI ( 300kPa ) w/Gas: 2200 cc/min = 210 lb/hr
• Static Flow Rate @ 58 PSI ( 400kPa ) w/Gas: 2550 cc/min = 240 lb/hr
• Static Flow Rate @ 78.5 PSI ( 500kPa ) w/Gas: 2865 cc/min = 273 lb/hr
• Static Flow Rate @ 88 PSI ( 600kPa ) w/Gas: 3155 cc/min = 300 lb/hr
• Static Flow Rate @ 101.5PSI ( 700kPa ) w/Gas: 3350 cc/min = 320 lb/hr
• Connector: EV14 Injector Length: O-Ring to O-Ring: 1.5. / 37.5 mm
• Injector Body Diameter: 16mm
• O-Ring: 14.5mm Viton
• Acceptable Fuels: CNG USE

Bosch will not warranty any 210lb injector that is run on any fuel other than CNG

These injectors are NOT compatible with gas/petrol with MTBE Oxygenate

Genuine authentic Bosch injector.